Panasonic AU-EVA1 Operating Instructions Manual

Also see for AU-EVA1: Manual Setup guide Manual

– 71 –Chapter 4 Operation — Basic operation of the menuOperating the menuVarious settings are possible from the menu.There are two methods of operation, a method to operate with the multidial or grip multidial, or a method to touch the LCD monitor.When operating with the multidialOperate the multidial on the camera by turning it in vertical direction or pushing it.Fig. 1 Fig. 21 Press the button when not recording.The menu is displayed.2 Select the menu to set.1) Turn the multidial to move the cursor to the menu to set.2) Press the multidial.The lower level menu is displayed.f The confirmation screen is displayed depending on the menu.f Perform the similar operation if there is next level.f In some menus, a screen to set the numeric value is displayed in the VIEW screen (Fig. 2).f In some menus, a message is displayed if a menu cannot be executed.f To return to one level higher, press the button.3 Select the item to set.1) Turn the multidial to move the cursor to the item to set.2) Press the multidial.A check mark is displayed at the left of the set item. (Fig. 1)f To return to one level higher, press the button.4 Press the button to close the menu.f Depending on the operating item, it will automatically return to the previous screen.@@ NOTEt In a screen to set the numeric value (Fig. 2), turn the multidial in your desired direction with the multidial pushed in, and hold it to change the valuewith high speed.t The grip multidial operates equally as the multidial on the camera.