Panasonic AU-EVA1 Operating Instructions Manual

Also see for AU-EVA1: Manual Setup guide Manual

– 66 –Chapter 4 Operation — Operating each screenr [VFR] displayWhen the [CAMERA SETTINGS] menu → [FPS] → [VFR SW] → [ON] is set, [VFR] is displayed at the top left of [FPS], and recorded with the frame rateset in [FPS]. Audio cannot be recorded when [FREQUENCY] and [FPS] are different.When the [CAMERA SETTINGS] menu → [FPS] → [VFR SW] → [OFF] is set, [VFR] is not displayed. Records in the 1x speed of the rate set in the[SYSTEM SETTINGS] menu → [SYSTEM MODE] → [FREQUENCY].[COLOR]When [COLOR] is selected in the HOME screen, the COLOR screen is displayed allowing to set the color of the image (gamma and gamut).[MAIN COLOR]: Sets the color of video recorded in the main recorder (entire camera system).[SDI OUT]: Sets the output image from the terminal.[HDMI OUT]: Sets the output image from the terminal.[LCD OUT]: Sets the output image from the terminal.@@ NOTEt When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], [MAIN COLOR] is fixed to [V-Log].t [SDI OUT]/[HDMI OUT]/[LCD OUT] settings‑ When [MAIN COLOR] is set to [V-Log]You can select [V-Log] or [V-709].‑ When [MAIN COLOR] is set to [SCENE1] to [SCENE5]Setting will be same as [MAIN COLOR].‑ When the [SYSTEM SETTINGS] menu → [SYSTEM MODE] → [SDI RAW] is set to anything other than [OFF], [RAW] is displayed in [SDI OUT], andit cannot be selected. [V-Log] and [V-709] can be selected in [HDMI OUT]/[LCD OUT].[SHUTTER]The SHUTTER screen is displayed when [SHUTTER] is selected in the HOME screen, allowing to set the shutter speed and enable/disable the shutterfunction.[VALUE]: The VIEW screen is displayed, and the shutter speed can be set.f Select from the previously registered shutter speed setting values in [`]/[{].f The shutter speed setting value can be added/deleted in the [CAMERA SETTINGS] menu → [SHUTTER] → [ADD deg]/[ADD sec]/[DELETE deg]/[DELETE sec]. Maximum of 12 setting values can be registered.[ON/OFF]: Enables/disables the shutter function.@@ NOTEt When the [CAMERA SETTINGS] menu → [SHUTTER] → [SW] → [OFF] is set, [VALUE] in the SHUTTER screen cannot be selected.