36 Main Mode: Thumbnail ScreenSet the simplified property display items to display on the leftside of a thumbnail.1 Use the cursor buttons to align the cursor with the“PROPERTY DISP.” (➝ page 85) menu item.2 Press the [SET] button to open the item menu.All selected items are indicated by check marks.3 Press the [SET] button to add a check mark for anitem you want to display.Pressing the [SET] button adds a check mark to an un-checked item and clears the check mark from a checkeditem.Note:• Up to six items can be displayed simultaneously.• When the sixth item has been selected, no other uncheckeditem can be selected. Clearing the check mark from achecked item allows you to select another item.1 Use the cursor buttons to align the cursor with the clipyou want to play.2 Press the [PLAY] button.Playback begins from the clip at the cursor position. Afterthe clip at the cursor position has been played, the subse-quent clips are played back in order. When the last cliphas been played, the thumbnail screen reappears.Note:• To play back a clip, you do not need to select it (so that thethumbnail appears inside a blue frame).• You can change the thumbnail display settings to play backclips only from specified slots or play back only clips withtext memos added.• You can change the order that clips are played back.1 Select the clips in the order you want them to be playedback.2 Select [SELECTED CLIPS] in the “REPOSITION” (➝ page82) menu item to switch the thumbnail display to only theselected clips (in the order they were selected).• Pressing the [PAUSE] button instead of the [PLAY]button displays the first frame of the clip as a still image.• A clip whose clip number is red cannot be played back.• Pressing the [REW] button instead of the [PLAY]button rewinds playback, while pressing the [FF] buttonfast forwards playback.Setting the items to display as properties Playing Back ClipsPlaybackヱロモヺ ヱモヶヴユ ンユヤ ヴユモンヤラュリヴヱロモヺ ヵラヶヮャワモリロ ヵヰヱ ヴラリョヵヶヴユン ヴユヵユヹリヵ ヮユワヶュリモヨルヰヨヤモワヤユロ ャヰヵヵヰヮヒ フビ ブピ プ12