Panasonic AJ-PD500P Operating Instructions Manual

Contents

Panasonic AJ-PD500P Operating Instructions Manual Manual pdf 37 page image

Main Mode: Thumbnail Screen 37Main Mode• Pressing the [STOP] button during clip playback stopsplayback and redisplays the thumbnail screen.• When playback is stopped, the cursor moves to the clipplayed prior to stopping.• Video and audio playback may be disrupted between clipsin different video formats (1080i, 1080p, etc.) or compres-sion formats.• When clips with the same video format but different audio bitrates are played back continuously, the audio between clipswill be muted.• Changing the thumbnail screen to text memo display allowsyou to start playback from a text memo position.• You can select the playback start position for playback fromthumbnails in the “PB POSITION” (➝ page 84) menu item.When “ONE CLIP PLAY” is assigned to a [USER] button,pressing the [USER] button plays only the clip at the cursorposition.(➝ “USER BUTTON” page 99)Note:• When the thumbnail screen is redisplayed after one clip play-back ends, the cursor moves to the next clip.• All buttons except the [STOP] button are disabled duringone clip playback.• One clip playback starts from the position set in the “PB POSI-TION” (➝ page 84) menu item.• When JOG/SHTL is used to display a still image during play-back from the thumbnail screen, the [USER] button to which“ONE CLIP PLAY” has been assigned allows you to play to theend of the clip from the position of the still image.• One clip playback is also performed when the [PLAY] but-ton is pressed while holding down the [SHIFT] button.Operation is the same as in the recording/playback screen.(➝ “Variable speed playback” page 30, “Frame-by-frameplayback” page 31)1 Select “TEXT MEMO CLIPS” in the “REPOSITION”(➝ page 82) menu item.The thumbnails of clips with text memos are displayed atthe top of the LCD monitor. Information on the clip textmemo selected with the cursor is displayed at the bottomof the LCD monitor.Note:• When a text memo clip with different settings for the “SYS-TEM MODE” (➝ page 105) menu item is displayed,may be displayed instead of the thumbnail for the text memoposition displayed at the bottom.2 Select the clip with a text memo that you want playand press the [SET] button.The cursor moves to the bottom of the LCD monitor.3 When the cursor is at the bottom, use the left or rightcursor button to align the cursor with the thumbnailwith a text memo that you want to play and thenpress the [PLAY] button.The clip is played back from the time code position of thetext memo selected with the cursor. When you press the[STOP] button to stop playback or when playbackstops upon reaching the end of the clip, the thumbnailscreen reappears and the cursor returns to the thumbnailof the text memo where playback was started. Press the[EXIT] button to return the cursor to the top of the thumb-nail screen.Note:All buttons except the [STOP] button are disabled duringplayback.Playing back one clip (ONE CLIP PLAY)Using variable speed playback and frame-by-frame playbackPlaying back from a text memo positionThumbnaildisplayBlue indicates selectednumber of text memo clipsand white indicates totalnumber of text memo clips.Indicates still imagesincluded with the textmemos.The cursor moves.