Panasonic AJ-PD500P Operating Instructions Manual

Contents

Panasonic AJ-PD500P Operating Instructions Manual Manual pdf 35 page image

Main Mode: Thumbnail Screen 35Main Mode17. Status messageDisplays a message indicating the processing status. Forexample, the “UPDATING” text message and a rotatingicon are displayed during screen updating.18. Simple property indicationDisplays the properties of the clip at the cursor position.This is displayed when the “THUMBNAIL SIZE” (➝ page84) menu item is set to “SMALL.”You can select the information to display from the menu.(➝ “Setting the items to display as properties” page 36)Note:When there are more characters than can be displayed, onlythe range of characters that can be displayed are shown.19. Thumbnail scroll barIndicates the location of the currently displayed thumbnailamong all of the thumbnails.20. Unplayable indicatorIndicates a clip that cannot be played because, for exam-ple, the frequency differs from that of the system.21. DC input voltage indicationIndicates the input voltage value when the “EXT DC IN SE-LECT” (➝ page 98) menu item is set to other than “DCPWR SUPPLY.”When other than “DC PWR SUPPLY” is set, the DC voltagevalue is indicated even with AC power supply input.The thumbnail screen can be customized according to the op-erating conditions to improve efficiency.Example:• Set the settings of the “THUMBNAIL SETUP” (➝ page 84)menu item as shown below.Set “INDICATOR” to “ALL HIDE”Set “DATA DISPLAY” to “CLIP NAME”Set “THUMBNAIL SIZE” to “LARGE”• Set the “REPOSITION” (➝ page 82) menu item to “SELECT-ED CLIPS”.Figure showing the thumbnail screen display exampleNote:The thumbnail and OSD output destinations can be switched in“OSD OUTPUT” (➝ page 96).1 Use the cursor buttons to align the cursor with thetype of clips you want to display in the “REPOSI-TION” (➝ page 82) menu item.2 Press the [SET] button.1 Use the cursor buttons to align the cursor with thesize of thumbnails you want to display in the“THUMBNAIL SIZE” (➝ page 84) menu item.2 Press the [SET] button.The display of clip information can be customized accordingto purpose.1 Use the cursor buttons to align the cursor with theitem you want to set in the “DATA DISPLAY” (➝ page84) menu item.2 Press the [SET] button.Changing the Thumbnail DisplaySetting the thumbnails to displaySetting the thumbnail sizeSetting the display of clip information