Main Mode: Recording/Playback Screen 31Main Mode1 Press the [PAUSE] button, [SEARCH] button,and [STOP] button (when “STOP EE SEL” - “PB”is set) to switch to still image mode.2 Press the up or down cursor button.• The up cursor button performs frame-by-frame playbackin the forward direction and the down cursor button per-forms frame-by-frame playback in the backward direction.• Holding down a cursor button performs continuousframe-by-frame playback. To return to normal playback,press the [PLAY] button.1 Assign the “ONE CLIP PLAY” function to a [USER]button in the “USER BUTTON” menu.(➝ Setup Menu “USER BUTTON” page 99)2 Press the [PAUSE] button while a thumbnail isdisplayed or from the thumbnail display screen andthen press the [USER] button with “ONE CLIP PLAY”assigned when in still image mode.• Only the clip at the cursor position or current position isplayed.• Only STOP is enabled during this playback.Note:One clip playback is also performed when the [PLAY]button is pressed while holding down the [SHIFT] button.1 Switch to playback or a still image or other image dis-play state.2 Press the [PREV] button or [NEXT] button.The clip beginning or text memo position is located in accor-dance with the “SEEK POS SEL” (➝ page 87) menu item.Play back playable clips repeatedly.1 Press [MENU].2 Set the “REPEAT PLAY” (➝ page 86) menu item to“ON.”3 Close the menu.4 Press the [PLAY] button to start playback.All clips are played repeatedly.• Repeat playback continues until the [STOP] buttonis pressed.• Repeat playback is not performed during playback otherthan normal playback, for example, variable playback,and playback stops at the beginning (BOS) or end (EOS)of a playable clip.• During repeat playback, “REPEAT PLAY” is displayed forthe operating status on the OSD.Frame-by-frame playbackOne clip playback (ONE CLIP PLAY)Clip and text memo forward/rewindョョ ヱロモヺ ヱモヶヴユ ンユヤ ヴユモンヤラュリヴヱロモヺ ヵラヶヮャワモリロ ヵヰヱ ヴラリョヵヶヴユン ヴユヵユヹリヵ ヮユワヶュリモヨルヰヨヤモワヤユロ ャヰヵヵヰヮヒ フビ ブピ プヴヵヰヱ21Repeat playback