Panasonic AJ-PD500P Operating Instructions Manual

Contents

Panasonic AJ-PD500P Operating Instructions Manual Manual pdf 105 page image

Setup Menu: Menu List 105Setup Menu_ is the factory default setting._ is the factory default setting.SYSTEMSYSTEM MODEItem Settings and brief function descriptionLINE&FREQSets the number of lines and frequency of the system, recording format, and audio quantization bit rate. When the num-ber of lines and frequency are selected, only the items that can be set with that frequency are displayed. When the fre-quency is changed, the unit needs to be restarted. A dialog appears when a restart is required.1080-59.94P:Selects 1080p for the number of lines and 59.94 Hz for the system frequency.1080-50P:Selects 1080p for the number of lines and 50 Hz for the system frequency.1080-59.94i*1:Selects 1080i for the number of lines and 59.94 Hz for the system frequency.1080-50i*2:Selects 1080i for the number of lines and 50 Hz for the system frequency.480-59.94i:Selects 480i for the number of lines and 59.94 Hz for the system frequency.576-50i:Selects 576i for the number of lines and 50 Hz for the system frequency.REC FORMAT<“LINE&FREQ” submenu>Selects the recording codec.AVC-I100: Selects AVC-Intra100.AVC-I50: Selects AVC-Intra50.AVC-G50: Selects AVC-LongG50.AVC-G25: Selects AVC-LongG25.DVCPRO HD: Selects DVCPRO HD (100 Mbps).DVCPRO50: Selects DVCPRO50 (50 Mbps).DVCPRO: Selects DVCPRO (25 Mbps).DV: Selects DV (25 Mbps).AUDIO SMPL RES<“REC FORMAT” submenu>Selects the quantization bit rate for audio recording in the AVC-Intra 100 or AVC-Intra 50 recording format.16BIT: Sets the audio recording bit rate to 16 bit.24BIT: Sets the audio recording bit rate to 24 bit.Note:The audio recording bit rate is 24 bit when the recording format is AVC-LongG50, or AVC-LongG25 and 16 bit whenthe recording format is DVCPRO HD, DVCPRO50, DVCPRO, or DV, regardless of the setting of the setting item.*1 This is the factory default setting of the AJ-PD500P.*2 This is the factory default setting of the AJ-PD500E.SYSTEM SETUPItem Settings and brief function description FREQ indicationsSYS H(HD)Adjusts the system phase of HD SDI output (in 13.5-ns/6.75-ns <1080/59.94p and 1080/50p> steps).-2750 to 0 to 2750-: Advances the phase.+: Delays the phase.SYS H(SD)Adjusts the system phase of analog composite output and SD SDI output (in 37 ns steps).-1728 to 0 to 1728-: Advances the phase.+: Delays the phase.AV PHASEAdjusts the phase of audio output in relation to the video output (in 20.8 μs steps).-128 to 0 to 127-: Advances the phase of audio output in relation to the video output.+: Delays the phase of audio output in relation to the video output.59.94Hz 50Hz59.94Hz 50Hz59.94Hz 50Hz