Table 4. Modem result codes (continued)Numeric Result code Description61 CONNECT 21600 The modem has connected to the line, the DTE speed is 21600 bpsand DTE speed reporting is enabled.62 CONNECT 24000 The modem has connected to the line, the DTE speed is 24000 bpsand DTE speed reporting is enabled.63 CONNECT 26400 The modem has connected to the line, the DTE speed is 26400 bpsand DTE speed reporting is enabled.64 CONNECT 28800 The modem has connected to the line and either the line speed is28800 bps and DCE speed reporting is enabled, or the DTE speed is28800 bps and DTE speed reporting is enabled.66 +DR: ALT The modem has connected to the line in MNP Class 5 and +DR:message reporting is enabled. (See S95, Wn, and Xn.)67 +DR: V.42B The modem has connected to the line in V.42 bis and +DR: messagereporting is enabled. (See S95, Wn, and Xn.)69 +DR: NONE The modem has connected to the line without data compression and+DR: message reporting is enabled. (See S95, Wn, and Xn.)70 +ER: NONE The modem has connected to the line without any form of errorcorrection and the +ER: message reporting has been enabled. (SeeS95, Wn, and Xn.)77 +ER: LAPM The modem has connected to the line in V.42 LAPM error correctionmode and +ER: message reporting has been enabled. (See S95,Wn, and Xn.)78 +MRR: 31200 The modem has connected to the line at 31200 bps and carrierreporting is enabled. (See S95 and Xn.)79 +MRR: 33600 The modem has connected to the line at 33600 bps and carrierreporting is enabled. (See S95 and Xn.)80 +ER: ALT Sent when the modem has connected in the MNP mode of errorcorrection, and +ER: message reporting has been enabled. (SeeS95, Wn, and Xn.)83 LINE IN USE The modem attempted to go off-hook when an extension wasalready occupying the line.84 CONNECT 33600 The modem has connected to the line, the DTE speed is 33600 bpsand the DTE speed reporting is enabled.91 CONNECT 31200 The modem has connected to the line DTE speed is 31200 bps andthe modem is to report the DTE speed upon connecting.134 +MCR: B103 The modem has connected to the line with Bell 103 modulation andmodulation reporting is enabled. (See +MR, S95 and Xn.)135 +MCR: B212 The modem has connected to the line with Bell 212 modulation andmodulation reporting is enabled. (See +MR, S95 and Xn.)136 +MCR: V21 The modem has connected to the line with ITU-T V.21 modulationand modulation reporting is enabled. (See +MR, S95 and Xn.)137 +MCR: V22 The modem has connected to the line with ITU-T V.22 modulationand modulation reporting is enabled. (See +MR, S95 and Xn.)138 +MCR: V22B The modem has connected to the line with ITU-T V.22 bis modulationand modulation reporting is enabled. (See +MR, S95 and Xn.)139 +MCR: V23 The modem has connected to the line with ITU-T V.23 modulationand modulation reporting is enabled. (See +MR, S95 and Xn.)70 User Guide
