Lenovo ThinkPad T520 User Manual

Also see for THINKPAD T520: Deployment guide Deployment guide Guía de despliegue Guide de déploiement Guida alla distribuzione

Contents

2. Insert the replaceable device into the bay; then press the device firmly into the connector.3. Press the Fn key to return from sleep (standby) mode.Inserting the hard disk drive into the adapterThe ThinkPad Serial Hard Drive Bay Adapter III (hard disk drive adapter), which is available as an option,enables you to upgrade the capacity of your computer by installing a secondary hard disk drive.Note: The ThinkPad Serial Hard Drive Bay Adapter III supports only 2.5 inch (7 mm height) hard disk drive.To install the hard disk drive in your computer, you first insert the hard disk drive into the hard disk driveadapter, and then insert the hard disk drive adapter into the serial Ultrabay enhanced of your computer.Note: You can install a 9.5-mm-thick serial Ultrabay slim or a 12.7-mm-thick serial Ultrabay enhanceddevicein the serial Ultrabay enhanced.Attention: Replace a hard disk drive only if you are upgrading it or having it repaired. Frequent replacementof the hard disk drive might damage the drive and bay.1. Remove the hard disk drive from your computer. To remove the drive, refer to the instructions givenin “Replacing the hard disk drive” on page 126.2. Open the hard disk drive stopper.174 User Guide