| 
Table 3. Modem command listCommand Description Syntax ValuesZZZ Reset to defaultconfigurationZZZ+FCLASS+FCLASS+FCLASS Select Active ServiceClass+F+F+FCLCLCLASASASSSS= 0: Select Data Mode1: Select Facsimile Class 1Mode1.0: Select Facsimile Class 1.0Mode8: Select Voice Mode+VCID+VCID+VCID Caller ID +VC+VC+VCIDIDID= 0: Disable Caller ID reporting1: Enables Caller ID withformatted presentation to theDTE.2: Enables Caller ID withunformatted presentation to theDTE.+VRID+VRID+VRID Report Retrieved Caller ID +VRID+VRID+VRID= 0: Reports Caller ID withformatted presentation to theDTE.1: Reports Caller ID withunformatted presentation to theDTE.\N\N\N Operating Mode \N\N\N 0: Selects normal speedbuffered mode (disableserror-correction mode)and forces &Q6 (selectsasynchronous operation innormal mode.)1: Same as 0.2: Selects reliable (errorcorrection) mode and forces&Q5 (the modem will try tonegotiate an error correctedlink). The modem will firstattempt a LAPM connection andthen MNP connection. Failureto make a reliable connectionresults in the modem hangingup.3: Selects auto reliable modeand forces &Q5 (the modemwill try to negotiate an errorcorrected link). This operatesthe same as \N2 except failureto make a reliable connectionresults in the modem falling backChapter 2. Using your computer 59 |
