JVC CX-7000 Series Electronic Manual

10 Click [Next]v A port selection screen appears.v Select [CX-7000N Port] under [Create a new port]. .11 Click [Next]v An install information confirmation screen appears. .12 Check the installation information, followed by clicking [Finish]v To change the settings, click [Back].m Windows XPv A [Software Installation] screen appears. .A Click [Continue Anyway]v A [Windows Security Alert] screen appears. .B Click [Unblock]v The program will fail to function properly if you click on buttonsother than [Unblock].m Windows Vistav A [Windows Security Alert] screen appears. .A Click [Unblock]v The program will fail to function properly if you click on [Keepblocking].v A [CX-7000N Port] screen appears. .13 Select the [Property] tabA Select this printer from [Printer List]v When connecting using the IPv4 address, select [IPv4], followedby clicking [Find...] to search for the printer. After clicking [IPv4],you can search for the printer by directly entering the IPv4 addressin the [Printer List].v When connecting using the IPv6 address, select [IPv6], followedby clicking [Find...] to search for the printer. After clicking [IPv6],you can search for the printer by directly entering the IPv6 addressin the [Printer List].Memo:v Ethernet (LAN) connection is improper if “Not Connected” appearsin the [Printer List]. If the printer that is currently being installedcannot be found by clicking [Find...], end the installation processand reinstall the program.v If “Not Selected” appears in the [Printer List], select an item thatcoincides with the IP address of the printer that is currently beinginstalled from the pull-down list.B Enter the [Port Name]14 Click [OK]m Windows XPv A [Software Installation] screen appears. .A Click [Continue Anyway]Setup71