JVC GV-SP2 Connection Manual

Also see for GV-SP2: Instructions User manual

MENUD I SPLAYENDPROTECTDELETEDPOFPR I NTNO . RESETFORMATPR I NTRETURNPR I NTLAYOUT :SHEETS :EF FECT :NORMAL0 1OF FFOR OWNERS OF ANOPTIONAL PRINTER**Equipped with a PRINT DATA connectorThe camcorder can control a video printer equippedwith a PRINT DATA connector.This instruction sheet only explains connection tothe printer and commands to operate it.For details on loading an ink cassette or paper tray,etc., refer to the instructions provided with the printer.Connection1 Make sure all units are turned off.2 Connect the camcorder’s PRINTER connectorto the printer’s PRINT DATA connector using aprinter cable (optional) as shown.• When connecting, align the mark on theprinter cable plug with the mark on thecamcorder and printer.NOTE:It is recommended to use the AC Power Adaprter/Charger as the power supply instead of the batterypack.ToPRINTERPrinter cable(optional)ToPRINTDATAGV-SP2 printer(optional)Basic PrintingYou can print still images stored in a memorycard.1 Play back the memory card to display the stillimage you wish to print ( “Basic Playback FromMemory Card” of the camcorder's instructions).2 Press the MENU wheel in. The Menu Screenappears. Rotate the MENU wheel to select“PRINT”, then press it. The PRINT Screenappears.• To exit the PRINT Screen, rotate the MENUwheel to select “RETURN”, then press it.3 To start printing, rotate the MENU wheel toselect “PRINT”, then press it. The message “NOWPRINTING!!” appears. When printing is finished,the message “PRINTING COMPLETE” appearsand the normal playback screen reappears.NOTES:● To print a still image with titles/frames stored in theprovided memory card, “Title Impose” of thecamcorder's instructions.● To print a still image with special effects or layouts, “Layout Print”, “Effect Print”.● To print still images stored on a tape, first dub themfrom the tape to a memory card, then print them. Todub images, refer to the camcorder’s instructions.● To make 2 or more prints of the same still image, “Number Of Prints”.● To print still images with a white frame, “LayoutPrint”.● A melody is played during printing. To turn themelody off, set “BEEP” to “OFF” in the SYSTEMMenu. Refer also to the camcorder’s instructions.DisplayMenu ScreenPRINT ScreenPrintingNumber Of PrintsYou can set the number of prints.1 Play back the memory card to display the stillimage you wish to print ( “Basic Playback FromMemory Card” of the camcorder's instructions).2 Press the MENU wheel in. The Menu Screenappears. Rotate the MENU wheel to select“PRINT”, then press it. The PRINT Screenappears.• To exit the PRINT Screen, rotate the MENUwheel to select “RETURN”, then press it.3 Rotate the MENU wheel to select “SHEETS”and press it. Then, rotate it to input the numberyou wish to print and press it. Selection iscomplete.4 To start printing, rotate the MENU wheel toselect “PRINT”, then press it. The message “NOWPRINTING!!” appears. When printing is finished,the message “PRINTING COMPLETE” appearsand the normal playback screen reappears.To Cancel Printing . . ..... press the MENU wheel in. It is not possible tocancel the current image being printed, butthe next one will be canceled.LYT0884-004AEnglishMENU WheelMENUD I SPLAYENDPROTECTDELETEDPOFPR I NTNO . RESETFORMATPR I NTRETURNPR I NTLAYOUT :SHEETS :EF FECT :NORMAL0 1OF FPR I NTSHEETS : 0 1DisplayMenu ScreenPRINT ScreenPrintingMENU WheelEx. : Connection to the GV-SP2 printer

/ 2

Related manuals for JVC GV-SP2