JVC CX-7000 Series Electronic Manual

m If the card cannot be dischargedA Turn off the powerB Open the printer door, and check the position of the jammedcard .C Attach the jog dial to the cleaning roller shaft . .D Turn the cleaning roller shaft in the clockwise direction, whilechecking the position of the card .E Remove the card after it is discharged from the card load slotCautions:v If the card cannot be removed, do not try to do so forcibly.Consult our authorized dealers or the servicing personnel.F Restore the jog dial to its original position, and close theprinter doorG Turn on the power"Go to step 3" (A page 46)Error Code Jam(TurnOver) 91v Card jam near the card turn over unit. .1 Turn off the power2 Remove the card hopper .3 Detach the card load slot cover .4 Open the printer door, and remove the cleaning unit .Troubleshooting47