JVC CX-7000 Series Electronic Manual

Error Code Jam(Transfer) 93v Card jam in the card feed roller. .1 Press KNB to reset the printer .v The card is discharged from the NG card outlet. .m If the card cannot be dischargedA Turn off the power, and detach the card hopper .B Open the printer door, and check the position of the jammedcardC Attach the jog dial to the card feed roller shaft and cleaning roller shaft..D Turn the card feed roller shaft and cleaning roller shaft in theclockwise direction, while checking the position of the card .v Remove the card after it is discharged from the card load slot.(For single-sided printers, the card is discharged from the NGcard outlet.)Cautions:v If the card cannot be removed, do not try to do so forcibly.Consult our authorized dealers or the servicing personnel.E Restore the jog dial to its original positionF Install the card hopper, and close the printer doorG Turn on the powerTroubleshooting50