JVC CX-7000 Series Electronic Manual

Card Feed Roller/Heating Rollerv The color of the printed card may appear faded or dirt may appearconspicuous if the card feed roller or heating roller is dirty.v Perform cleaning after printing about 1,000 cards.Cautions:v If the security lock is on, deactivate it. After work is complete,activate the security lock again.v Before cleaning the card feed roller and heating roller, make surethat you clean the cleaning roller. Otherwise, dirt on the cleaningroller may be attached to the cleaning card, causing its cleaningcapability to deteriorate.v Stand the cassette on a flat surface as illustrated in the diagram.Avoid doing so on the floor as dust attached to it may cause printingerrors. .v If card jam occurs when the cleaning card is inserted, turn off and onthe power of the printer. Doing so automatically discharges the card.v Do not perform any work on the printer door. Do not place heavyobjects or apply load on the printer. Doing so may damage it.v Each cleaning card can only be used once. Reusing a dirty card maydirty the roller or cause the printer to malfunction.v After cleaning is complete, check to ensure that all dismantled partsare restored to their original positions. Failure to restore the partsmay result in malfunction of the printer.v For details on separately sold items, please consult our authorized dealers.1 Open the printer door. Press and hold down the cassette button,and remove the retransfer film cassette (on the left) . .2 Close the printer door3 Remove the card hopper .4 Turn on the power .5 Press I to set to [Cleaning] .6 Press G to set to [Rollers] .7 Press Bv A [Film Checking..] message appears, followed by a [Cleaning StartOK?] message. .8 Peel off the backing paper from the cleaning card (sold separately) .Maintenance37