v Enter the shared name when you are sharing a printer. .Memo:v You can also set the shared name after installation is complete.8 Click [Next]v A port selection screen appears.v Select [CX-7000U Port] under [Create a new port]. .9 Click [Next]v An install information confirmation screen appears. .10 Check the installation information, followed by clicking [Finish]v To change the settings, click [Back].m Windows XPv A [Software Installation] screen appears. .A Click [Continue Anyway]m Windows Vistav A [Windows Security] screen appears. .A Click [Install] partv A USB cable connection instruction screen appears. .11 Connect the printer and computer using the USB cable12 Turn on the power of the printerv Installation starts automatically after the printer is detected.v Installation does not start if connection is improper. When thisoccurs, check the connection.m Windows XPA [Found New Hardware Wizard] screen appears. .A Select [No, not this time], and click [Next]v An installation method selection screen appears. .Setup67