130 H-S81-HS Installation & Operation Manual — P/N LS10114-000HI-E:A 2/24/2015Operating Instructions Operator InterfaceScroll (fire/burglar alarm function)It operates at access level 1 or higher, and allows to scroll all currently active alarms or trou-bles of the selected zone of area 1 in chronological order, viewing the details of each event. It alsooperates in the history sub-menus of both area 1 and 2.Sounder Silencing (fire alarm function)It operates at access level 2 or higher, and deactivates the default sounder monitored outputand all the outputs defined as sounder when configuring the system. The display shows a messageinforming that sounders have been silenced, which is stored in the event history and sent to anyperipheral devices (host/printer). This function can be activated only after silencing the localbuzzer.Delay override (fire alarm function)It operates at access level 1 or higher, and cancels the activation delay time of the actuatorsof configured area 1, where a delay time count is active at that moment.Evacuation (fire alarm function)At access level 2 or higher, it immediately activates the default sounder monitored outputand all the outputs defined as sounder in system configuration. The display shows a messageinforming that evacuation has been completed, which is stored in the event history and sent to anyperipheral devices (host/printer).Esc (fire/burglar alarm function)It operates in the various operator menus, and cancels the digital keys or selected menus onthe display. It routes back to the previous menu.Enter (fire/burglar alarm function)It operates in the various operator menus, and confirms the digital keys or selected menuson the display.Up arrow (fire/burglar alarm function)It is used to select vertically the menu options or to scroll upward.Down arrow (fire/burglar alarm function)It is used to select vertically the menu options or to scroll downward.Right arrow (fire/burglar alarm function)It is used to select menu options horizontally.Left arrow (fire/burglar alarm function)It is used to select menu options horizontally.Function (fire/burglar alarm function)It allows to access directly the menu of the access level active when it is pressed1/9 number keys (fire/burglar alarm function)They are used to select password digits and to enter new data in the menus of the operator cycle
