CLI Command ReferenceCommand Summary and Usage InformationMakito X User’s Guide, v2.2, Issue 02 252Operation CommandsTable A-1 Operation CommandsCommand Descriptionvidenc Use to manage video encoding parameters, including startingand stopping encoding of the video input.vidin Use to view and manage video input settings.audenc Use to manage encoder audio acquisition settings, includingstarting and stopping encoding of the audio input.stream Use to create and manage audio/video streams.metadata Use to manage metadata sources to capture metadata (eitherKLV or CoT) and then incorporate data information within theMPEG Transport Stream.logo Use to manage logo overlays (i.e., a graphic file to display as alogo overlay in the encoded video).mklogo Use to convert a graphic file to Haivision’s overlay image format(.oly) in order to display the image as a logo overlay.mkstill Use to convert a static picture into a file containing an encodedsingle H.264 GOP sequence. This is required in order toconfigure a Makito X stream with a static image that will replacethe “real” video stream when streaming is paused.passthrough Use to enable bi-directional serial passthrough for controllingserially attached devices such as PTZ controlled cameras.snapshot Use to take and manage snapshots from the video input.still Use to manage still image files on the Makito X file system.Static images are used to replace the “real” video stream whenstreaming is paused.talkback Use to manage audio talkback settings to allow two-way audiocommunication using the encoder’s Audio Output.date Use to display the current date.temperature Use to display the current temperature of the unit.record Use to manage recording of streams, including starting andstopping recording.roi Use to enhance the quality of the encoded video for a regionwithin the video frame (i.e., a region of interest).
