Managing the EncoderConfiguring Metadata CaptureMakito X User’s Guide, v2.2, Issue 02 118Metadata SettingsThe following table lists the encoder Metadata controls and settings:NOTE The fields depend on the hardware setup of the encoder; i.e., whether the serialport or SDI video is connected; UDP is always available.Metadata Setting Default Description/ValuesMetadata Source NameName n/a Enter a unique name for the source.Type Network Select the type of metadata source to create.● Network or● HD-SDINOTE: Additional HD-SDI sources can becreated to stream KLV over SDI at differentrates.HD-SDI Input BNC-1 (HD-SDI source only) Select the Input portfor the metadata source.● BNC-1● BNC-2Decimation Settings (HD-SDI only)Decimation None (Optional) For KLV over SDI metadata input,the ingested KLV messages can be frame-decimated to reduce the bandwidth used bythe metadata service. Select either thedecimation factor or a reference encoder tomatch its video frame rate.● None● By Factor: 1/2..1/60NOTE: 1/2 means divide the amount byhalf, etc.● With Encoder: Select a video encoderfrom the drop-down list and the metadataAU rate will match the video encoderframe rate.
