Managing the EncoderConfiguring Metadata CaptureMakito X User’s Guide, v2.2, Issue 02 107The changes will take effect immediately but will not be saved and will be lost after areboot.TIP To save the current configuration, open the A DMINISTRATION > PRESETS page. See“Saving and Loading Presets” on page 178.8. To start or stop the stream, click Start or Stop (as applicable).9. To view Metadata statistics, click Statistics. For details, see “Metadata Statistics” onpage 122.10. To return to List View, click METADATA from the sidebar menu.Configuring HD-SDI Metadata SourcesNOTE The Makito X auto-detects the hardware setup of the encoder and automaticallycreates the source(s) if SDI video is connected.You can also create additional HD-SDI sources linked to the same video input which canbe configured to different decimation settings (as well as security reclassification andmission ID override). For example, you can have one high bitrate stream sending out allthe KLV as well as a lower bitrate stream that uses KLV decimation.Only progressive scan formats are supported (i.e., 1280x720p and 1920x1080p). TheMakito X can capture only 1024 bytes of KLV metadata per video frame.To configure HD-SDI metadata sources:1. From the Metadata List View, click the link for the HD-SDI metadata source.The Edit Metadata Source page opens for the selected source (HD-SDI source exampleshown following).
