Managing the EncoderConfiguring Logo OverlaysMakito X User’s Guide, v2.2, Issue 02 159Configuring Logo OverlaysNOTE The maximum file size for logo and still image files is 10 MB.You can configure the Makito X to display a graphic file as a logo overlay in the encodedvideo. One logo may be configured for each physical video input interface, i.e.:● Two logos on the Makito X SDI dual-channel #S/B-292E-HDSDI2 (BNC1 andBNC2);● One logo on the Makito X DVI #S/B-292E-DVI or the Makito X SDI single-channel#S/B-292E-HDSDI1.The image file can be uploaded in either BMP, JPEG, PNG, or GIF format. The image filewill be converted to Haivision’s image overlay (.oly) format.The logo position can either be relative (top left, top right, centered, etc.) or absolute (posi-tioned at the exact X and Y coordinates specified).To configure a logo overlay:1. On the Streaming page, click LOGOS from the sidebar menu.The LOGOS page opens, displaying the list of logo image files that have been uploadedfor the encoder, as shown in the following example.2. To upload a new image file in either BMP, JPEG, PNG, or GIF format, click Importand select the file in the Open File dialog box.
