OperationHaier LED HDTV EN-12AudioBalanceBassTrebleSound Surround OnEqualizer OffSpeaker OffAVL OffAudio Only05050VideoAudioChannelLockFunctionSelect BackAdjust (;,7ENTERSPDIF Type OffCH+/-VOL+/-PressB VOL+/ ENTER button to enter the menuand CH+/- button to go up and down to select thedesired option.PressC VOL+/ ENTER button to confirm and CH+/-button increase and decrease the level to adjust theselected option to your preference.Repeat step 2 and step 3 until desired audio qualityDhas been achieved.FunctionBalance:Y PressCH+/- button and VOL+/ENTER toconfirm, then press VOL+/- to adjust the audiooutput between left and right speakers.BassY :Press CH+/- button and VOL+/ENTER buttonto confirm, then press VOL+/- to increase ordecrease the level of the lower-pitched sounds.TrebleY :PressCH+/-CH+/- button and VOL+/ENTER to confirm, then pressVOL+/- to increaseor decrease the level of the higher-pitchedsounds.Sound surroundY : To turn the simulated surroundsound on or off.EqualizerY : To adjust the equalizer Off /Rock /Pop /Live/Dance/ Techno /Classic and Soft.SpeakerY : To adjust the speaker on or off.SPDIF TypeY : To adjust the SPDIF output: Off /DolbyDigital and PCM.AVLY : This will reduces the differences in volume levelamong broadcasters.Audio OnlyY : Press VOL+/ENTER button to confirm,the following display will appear on the screen:Press VOL- to select OK, then press OK to confirm. TheTV screen will be black and no picture , but the soundis still normal.If enter Audio Only mode, press POWER to exit!OK CancelYou can press POWER button to reveal the picture onthe screen.SAP Broadcasts SetupThis TV can receive MTS stereo programs and SAP(Secondary Audio Program) that accompanies the stereoprogram; if the station transmits an additional soundsignal as well as the original one.When having selected SAP button on the remotecontrol, this TV can only receive the signal when the TVstation transmits the proper signals.Mono sound is automatically received if the broadcastis only in Mono; even though Stereo or SAP has beenselected.Select Mono if you want to listen to mono sound duringstereo/SAP broadcasting.Stereo or SAP can be received in a Analog channel.Use the SAP button to select your desired MTSAmode in a analog signal. Each time you press theSAP button, Mono, Stereoor SAP appear. If otherlanguages are available on the digital signal, selectthem with the SAP button.Press EXIT button to save and return to TV viewing.BChannel Menu OptionsChannel menu will appear in main menu only in TVmode.PressA MENU button and CH+/- button until thefollowing menu appears on the screen.ChannelVideoAudioChannelLockFunctionSelect BackEXITTuner Mode AntennaChannel ScanChannel SkipChannel LabelsTime Shifting Mode OnCH+/-VOL+/-Downloaded from www.Manualslib.com manuals search engine