Menu
 PRODUCT TROUBLESHOOTING TV-0008-CSRDate: June 25, 2010Product: LCD TelevisionsSymptom: Timeshift function does not seem to be working correctly.Applicable Models:HL32XSL2 HL32XSLW2 HL42XZK42 HLC19K2 HLC19KW2HL40XSL2 HL40XSLW2 HL55XZK22 HLC22K2 HLC22KW2HL46XSL2 HL46XSLW2 HL32XK2 HLC22XSLW2 HLC19SL2HL24XSL2 HL24XSLW2 HL24XK2 HLC24XSLW2 HLC24XK2HL22XSL2 HL22XSLW2 HL22K2 HL22FW2 HL22F2HL19SL2 HL19SLW2 HL19K2 HLC19SLW2HLC24XSL2 HLC22XSL2Solution: Many Memory Devices do not meet the requirements necessary toproperly operate in TimeShift mode.Some common symptoms associated with the use of a Memory Device that is notcompatible are-• Time line appears at the bottom of the screen but no recording takes place• Time line appears to indicate it is recording but play, FF / REW do not work• Some playback is possible but the image freezes and no remote or manualfunctions can be activated. The unit must be unplugged in order to resumenormal operation.• The chronometer display does not count or counts backwards.Guidelines for proper operation:• Only works using TV Tuner as signal source.• TimeShift device can be –USB Flash DriveCompact Flash Card/ using adaptorSD Card/ using adaptor• USB Flash Drive must be USB 2 type as well as FAT32 .• Memory size dictates recording length capability. Recommended to use 4GB orlarger.• Can only record the program being watched, no timer recordings or 2nd channelrecording capability, when the channel is changed the recording will stop.• When stop is pressed recording is also no longer accessible. |
Questions and answers
Need help?
Ask question about this manual
Frequently asked questions
The Timeshift function may not be working correctly due to an incompatible memory device. Ensure that you are using a USB 2.0 type device with a FAT32 format, and that the memory size is 4GB or larger. Additionally, the Timeshift function only works with the TV Tuner as the signal source and can only record the program being watched, not on a timer or a second channel.
The minimum read/write speed required for a device to work properly with the Haier HL32XSL2 is 5MB/sec.
Compatible devices for the Haier HL32XSL2 can be found in retail outlets or online.
The external hard disk drive must be either 2.5” or 3.5” and formatted or partitioned in FAT32.
Yes, you can use a card reader, but it must have a transfer rate greater than 5MB/sec to ensure proper TimeShift operation.
Related manuals for Haier HL19SL2
Product
Learn More
Legal
Copyright © 2025 OneStart. All Rights Reserved