Haier HL19SL2 Owner's Manual

Also see for HL19SL2:

Please READ this manual carefully before operating your TV, and retain it forfuture reference.Veuillez lire ce guide attentivement et entièrement avant d'utiliser votretéléviseur, conservez ce guide pour vous y reporter ultérieurement.Se recomienda leer con atención este manual antes de poner enfuncionamiento su televisor y conservarlo para consultas futuras.HL19SL2/HL19SLW2/HL22XSL2/HL22XSLW2TFT-LCD TVTÉLÉVISEURLCDMANUAL PARA EL USUARIOOWNER’S MANUALGUIDED’UTILISATIONDEL TELEVISOR TFT-LCD010090509587

/ 24

Questions and answers

Need help?

Ask question about this manual

Frequently asked questions

To switch on/off the Haier HL19SL2 TV set, you can use the power button on the remote control or the power button located on the TV set itself.

To choose the input source on your Haier HL19SL2 TV, you can navigate to the 'Choose the Input source' section in the menu, which is detailed on page 10 of the manual.

To change the input source, press the INPUT button on the side panel of the TV. Press it repeatedly to cycle through the available sources until you reach the one you want to watch.

To connect a USB flash drive to the Haier HL19SL2 TV, use the USB input located on the back panel. This will allow you to view MPEG2 videos, JPEG images, or listen to MP3 songs.

If the remote control is not working, check the battery compartment on the back of the remote. Slide open the cover, load two (AAA) alkaline batteries ensuring the plus and minus poles are correctly aligned, and then replace the cover.

After subscribing to a cable TV service from a local provider, you can watch cable TV programming. The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV. For further information regarding cable TV service, contact your local cable TV service provider(s).

To turn off the TV and put it in standby mode, press the POWER button on the remote control or on the TV.

If the TV screen displays 'No Signal', it means there is no input signal being received. Ensure that the input source is correctly selected using the INPUT button on the remote control or on the TV, and that the external equipment is properly connected and turned on.

To adjust the color temperature, press the MENU button and use the CH+/- button to navigate to the Video menu. Then, select 'Color Temperature' and use the VOL+/ ENTER button to confirm. Use the VOL+/- button to adjust the color temperature to your preference, choosing between Cool, Standard, Warm, or User for manual adjustment.

You can adjust the playback speed by selecting from the available options: 1x, 2x, 4x, 8x, 16x, 32x.

Related manuals for Haier HL19SL2