Haier HL26K Owner's Manual

To connect a computer, use the VGA Video In jack for the video cable and the VGA Audio In jacks for the audio L/R cables from your computer.

To improve the picture quality in areas with poor signals, consider purchasing and properly installing a signal amplifier. If you need to split the antenna signal for two TVs, use a 2-Way Signal Splitter in the connections.

To connect a DVD player, turn on the DVD player and insert a DVD. Use the INPUT button on the remote control to select component mode. Press Play on the external equipment for program play. Refer to the DVD player's manual for operating instructions.

Yes, you will need to purchase HDMI Cable, HDMI to DVI Cable, and Analog Audio Cable (Stereo to RCA type) separately as they are not included with the product.

To perform a channel scan, press the MENU button on your remote control. Use the / button to select the Channel menu. Press or OK button to select Tuner, then use the / button to choose between Cable or Antenna mode. Select Channel Scan and press or OK button to start searching for available channels. To cancel the search, press the EXIT button.

The DNR (Digital Noise Reduction) setting reduces the appearance of digitizing errors caused by compression. You can adjust it to Off, Weak, Medium, Strong, or Auto depending on your preference.

The guide function allows you to select channels from a list and provides information about the current program being shown on each channel. To access this feature, navigate through the menu options until you find the guide section. Note that the program information displayed is provided by the broadcasters and may sometimes include only the channel number without a program title or description.

If your remote control is not working with your TV, ensure that you have entered the correct code for your TV brand. Refer to the list of codes provided in the manual and try different codes until you find the one that works.

To program the remote control for your Haier HL26K to work with a Samsung TV, use code 047 or 068 from the provided list of codes.

To clean the screen, wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it's almost dry, then wipe the screen. Make sure to remove excess water and let it air-dry before turning on your TV.