Haier HL32K Owner's Manual

To connect your computer to the Haier HL32K TV, use the VGA Video In and VGA Audio In jacks. Connect a video cable from your computer to the VGA Video In jack on the TV, and connect the audio L/R cables from your computer to the VGA Audio In jack.

To adjust the color temperature, go to the Video menu and select Color Temperature. You can choose between Cool (blue tint), Standard (neutral tint), or Warm (red tint) to suit your personal preferences.

The DNR (Digital Noise Reduction) setting reduces the appearance of digitizing errors caused by compression. You can adjust it to Off, Weak, Medium, Strong, or Auto depending on your preference.

To change the TV channel using the remote control, you need to enter the correct code for your specific TV brand from the list provided in the 'Remote Control Codes' section. Once you have the correct code, follow the instructions to program the remote control.

If your remote control is not working with your TV, ensure that you have entered the correct code from the 'Remote Control Codes' list. If the issue persists, try resetting the remote control or checking the batteries.

To program the remote control, you need to use the appropriate code from the list provided in the manual. For example, if you have a Samsung TV, you would use one of the codes listed under 'Samsung' (e.g., 047, 068, 071, 085). Enter the code using the remote control's SETBOX function.

If your TV does not respond to the remote control, ensure that you have entered the correct code for your specific brand and model. If the issue persists, try resetting the remote control by removing the batteries, waiting a few seconds, and then reinserting them.

To clean the screen, wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it's almost dry, then wipe the screen. Make sure to remove excess water and let it air-dry before turning on your TV.

If you expect to leave your TV dormant for a long time, such as during a vacation, it's recommended to unplug the power cord to protect against possible damage from lightning or power surges.