Haier HL19SL2 Owner's Manual

Also see for HL19SL2: Troubleshooting guide Owner's manual Owner's manual

Contents

Haier HL19SL2 Owner's Manual Manual pdf 14 page image

OperationEN-13 Haier LED HDTVChannel Skip2 Analog3 Analog4 Analog5 Analog5-1 Digital6 Analog7 Analog8 Analog9 Analog10 AnalogSelect BackEXITSetVideoAudioChannelLockFunctionENTER CH+/-VOL+/-Channel LabelsY : Allows you to name the channelthat is selected. Press VOL+/ENTER button toenter the submenu.Channel Label SetChannel IndexChannel LabelSelect BackEXITVideoAudioChannelLockFunction1CH+/-VOL+/-Then pressCH+/- button to select Channel Indexand VOL+/- button to select the position of the item thatyou want to change, afterward press INPUT to input thenumbers and symbols and ENTER button to confirm.Time Shifting ModeY : To turn the Time ShiftingMode on or off.Set theA Time Shifting On, then insert the USB drive inthe USB input.PressB PLAY/PAUSE to play or pause the program. Ifyou want to stop time shift function, press the STOPbutton.You can stop the time shift program being playedby pressing the STOP button.-00:00:011 x7:00 7:30-00:00:01 7:00 7:301.Timeshift time. The time offset to the current time.2.Playback status: It shows the playback status fortimeshift component.PressB VOL+/ ENTER button to enter the menuand CH+/- button to go up and down to select thedesired option.PressC VOL+/ ENTER button to confirm and VOL+/-button increase and decrease the level to adjust theselected option to your preference.Repeat step 2 and step 3 until desired audio qualityD has been achieved.FunctionTuner ModeY :Press VOL+/ENTER button to selectAntenna or Cable.Channel ScanY : Press VOL+/ENTER button to startto scan, press EXIT to cancel.Channel ScanStatus: Scanning... AntennaAnalog Channels: 4Digital Channels: 3CancelEXIT40%VideoAudioChannelLockFunctionAll channels now available will be automaticallypreset in order .After the search has finished, thefirst program number will display on the screen. Thissearch automatically adds only the active channels inyour area to the TV's memory. It deletes any channelson which there is no broadcast or a poor signal. Thechannels found are automatically saved.Channel SkipY :Press VOL+/ENTER button toenter the submenu, then press CH+/- buttonto select the channel number (eg.2) and pressENTER to confirm, a mark will be display in thepane as follows and this channel will be skippednext time you press CH+/- button but you can pressdigits button to select the channel. If you want toresume the channel, press ENTER button again.Downloaded from www.Manualslib.com manuals search engine