45Navigation SimulatorThe GPS 12CX’s simulator mode lets you practiceall aspects of its operation without active satellite ac-quisition. You can plan and practice trips, enter newwaypoints and routes, and save them for use duringnormal operation.To activate the simulator:1. From the Setup Menu Page, highlight ‘SYSTEM’, andpressENTER.2. Highlight the ‘MODE’ field, and pressENTER.3. Select ‘Simulator?’, and pressENTER.Once the simulator mode has been activated, usethe Position, Compass, or Highway Page to set yourspeed and track by highlighting the appropriate field,entering the desired value, and pressingENTER. Youmay also enter a new position if you desire (from thePosition Page).REFERENCENavigationSimulatorThe GPS 12CX does not track satellites insimulator mode. Never attempt to use thesimulator mode for actual navigation.Putting the GPS 12CX inPutting the GPS 12CX inPutting the GPS 12CX inPutting the GPS 12CX inPutting the GPS 12CX inSimulator ModeSimulator ModeSimulator ModeSimulator ModeSimulator ModeEnter Simulator Speed, TrackEnter Simulator Speed, TrackEnter Simulator Speed, TrackEnter Simulator Speed, TrackEnter Simulator Speed, Trackand Bearing in the appropriateand Bearing in the appropriateand Bearing in the appropriateand Bearing in the appropriateand Bearing in the appropriatefield.field.field.field.field.