17REFERENCEMap & TrackSetup PagesMap Setup Page and Orientation (cont.)The rest of the map setup page lets you specify whatitems are displayed on the map and their color.• ’Rings’– displays three range rings on the map at increments of 1/5th the selected map scale.• ’Route’– plots the straight-leg lines between waypointsof an active route and displays all route waypoint names.• ’Waypoint’– displays the nine nearest waypoints.• ’Label’– displays the waypoint label or comment.• ’Track Log’– displays and plots track log points on the map.To turn a display option on or off:1. Highlight the data field next to the desired optionand pressENTER.2. Select ‘YES’ or ‘NO’ and pressENTER.To assign a color to a display option:1. Highlight the color box next to the option data fieldand pressENTER.2. Highlight the desired color and press ENTER toconfirm the selection.Track Setup PageThe track setup page lets you manage the GPS12CX’s track log data. You can select whether to recorda track log and define how it is recorded.• Off – Disables the track log.• Wrap – Allows the unit to continue updating the tracklogafter all track log points are used by eliminating the oldesttrack log information.• Fill – Records track log information until all track log pointsare used.Note: Turning the track recording off will preventyou from using TracBack.Changing the Route DisplayChanging the Route DisplayChanging the Route DisplayChanging the Route DisplayChanging the Route DisplayOptionOptionOptionOptionOptionChanging the Route Display ColorChanging the Route Display ColorChanging the Route Display ColorChanging the Route Display ColorChanging the Route Display ColororororororororChanging the Track Record OptionChanging the Track Record OptionChanging the Track Record OptionChanging the Track Record OptionChanging the Track Record Optionor