GE JGS905 Owner's Manual

Also see for Profile JGS905: Dimensions and installation information Installation instructions Owner's manual Installation instructions

GE JGS905 Owner's Manual Manual pdf 32 page image

Problem Possible Causes What To DoClock and timer do Plug on range is not completely • Make sure electrical plug is plugged into a live, properlynot work inserted in the electrical outlet. grounded outlet.A fuse in your home • Replace the fuse or reset the circuit breaker.may be blown or thecircuit breaker tripped.Oven controls improperly set. • See the Using the clock and timer section.Oven will not self-clean The oven temperature is • Allow the range to cool and reset the controls.too high to set a self-cleanoperation.Oven controls improperly set. • See the Using the self-cleaning oven section.“Crackling” or This is the sound of the • This is normal.“popping” sound metal heating and coolingduring both the cooking andcleaning functions.Excessive smoking Excessive soil. • Touch the CLEAR/OFF pad. Open the windows toduring a clean cycle rid the room of smoke. Wait until the LOCKED lightgoes off. Wipe up the excess soil and reset the cleancycle.Oven door will not Oven too hot. • Allow the oven to cool below locking temperature.open after a clean cycleOven not clean after a Oven controls not properly set. • See the Using the self-cleaning oven section.clean cycle Oven was heavily soiled. • Clean up heavy spillovers before starting the cleancycle. Heavily soiled ovens may need to self-cleanagain or for a longer period of time.“LOCKED” flashes The self-clean cycle has been • Close the oven door.in the display selected but the door is notclosed.“LOCKED” light is The oven door is locked • Touch the CLEAR/OFF pad. Allow the oven to cool.on when you want because the temperatureto cook inside the oven has notdropped below thelocking temperature.“F—and a number You have a function error code. • Touch the CLEAR/OFF pad. Put the oven back intoor letter” flash operation.in the display If the function code repeats. • Disconnect all power to the range for at least 30seconds and then reconnect power. If the functionerror code repeats, call for service.32Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions Before you call for service…Troubleshooting Tips