GE Profile J2S968 Dimensions And Installation Information

Also see for Profile J2S968 SERIES: Owner's manual Installation instructions Owner's manual Owner's manual Owner's manual

For answers to your Monogram,® GE Profile™ orGE® appliance questions, visit our website atge.com or call GE Answer Center® service,800.626.2000.J2S968TEK/KEK/BEKGE Profile™ 30" Slide-In Dual Fuel RangeSpecification Created 7/05 221202You must use the rear filler strip kit shipped withthe range or the optional accessory backguardwhen installing these rangesNote: Cabinets installed adjacent to slide-inranges must have an adhesion spec of at least194° temperature rating.Optional Kits for Slide-In Gas Ranges:(Available at additional cost)Lower/Side Trim KitsJXS56BB - Lower Trim Kit (Black)JXS56WW - Lower Trim Kit (White)JXS56CC - Lower Trim Kit (Bisque)JXS77BB - Side Trim Kit (Black)JXS77WW - Side Trim Kit (White)JXS77CC - Side Trim Kit (Bisque)Accessory BackguardsJXS32BB (Black) - 4" High JXS32SS (Stainless) - 4" HighJXS32CC (Bisque) - 4" High JXS32WW (White) - 4" HighJXS37BB (Black) - 5-1/4" HighJXS37CC (Bisque) - 5-1/4" HighJXS37WW (White) - 5-1/4" HighEndcap Kit: JXS40 - Endcap kit to accommodate replace-ment where countertop may already be notched.Installation Information: Before installing, consultinstallation instructions packed with product forcurrent dimensional data.All GE ranges are equipped withan Anti-Tip device. The installationof this device is an important,required step in the installationof the range.RListed byUnderwritersLaboratories28-1/4*36Maintainat least 6"from nearestcombustiblesurface.AcceptableElectricalOutlet Area30" Slide-In RangeDimensions (in inches)45-1/82-1/4564-1/23030 Min.15 Min. 630" Slide-in Elec. RangeAug. 8, 2003 -km23-3/163030If you are NOT using theFiller strip or Backguard:If you are using theFiller strip or Backguard:25*Wall to front ofclosed door handleon model JSP34.28" on modelsJSP26/JSS26/16.Note: Range may be placed with 0" clearance (flush) at the back wall and side wallsbelow countertop if the range side trims above the countertop extend beyond the cabinetfronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearestcombustible surface.3031-1/228-1/4*36Maintainat least 6"from nearestcombustiblesurface.AcceptableElectricalOutlet Area30" Slide-In RangeDimensions (in inches)45-1/82-1/4564-1/23030 Min.15 Min. 630" Slide-in Elec. RangeAug. 8, 2003 -km23-3/163030If you are NOT using theFiller strip or Backguard:If you are using theFiller strip or Backguard:25*Wall to front ofclosed door handleon model JSP34.28" on modelsJSP26/JSS26/16.Note: Range may be placed with 0" clearance (flush) at the back wall and side wallsbelow countertop if the range side trims above the countertop extend beyond the cabinetfronts at least 1/4". (Self-clean models only.) Maintain at least 6" distance from nearestcombustible surface.3031-1/22-7/8"To FrontSurface OfCountertop20-5/8"Door ClearanceFrom FrontSurface ofCountertop31-1/43027-1/244-3/4A/B*AccessoryBackguard362"(Grates)24AcceptableGas Line &ElectricalOutlet AreaMax. depth ofcord, plug,receptacle box& gas hookup3-1/2" to preventinterferencewith drawer30" Min.30" Min.Shave Raised Edge To Clear31-1/8 Wide Control Panel366" Min.From Walls23-3/16 18" Min.13" Max.329-15/16" Min.30-1/16" Max.259/1671215*JXS37 is 5-1/4"and JXS32 is 4"Dimensions and Installation Information (in inches)Counter Cutout Dimensions (in inches)AcceptableGas Line &ElectricalOutlet AreaMax. depth ofcord, plug,receptacle box& gas hookup3-1/2 to preventinterferencewith drawer30 Min.30 Min.Shave Raised Edge To Clear31-1/8 Wide Control PanelA10208.eps36A/B23-3/16 18 Min.13 Max.329-15/16 Min.30-1/16 Max.A is 4" min. from walls on J2S968B is 6" min. from walls on JGS968/905259/1671215

/ 2

Related manuals for GE Profile J2S968 SERIES