Canon imageCLASS 2300 Network Manual

Also see for ImageCLASS 2300: Copying guide Specifications Basic guide Printer guide Setup

Contents

Canon imageCLASS 2300 Network Manual Manual pdf 67 page image

Setting Up a Computer for Printing3-10Using a NetWare Network (Windows)3Setting Up a Computer for PrintingAfter you have completed NetWare print service settings and printer protocolsettings, you are ready to set up each of the computers for printing.Connecting to a NetWare NetworkIn order to use a NetWare network, all computers that will perform printing need tohave NetWare client software installed. For details, see your NetWare andoperating system manuals.Installing Printer DriversNetSpot Console or NetSpot Device Installer is software for specifying printer andnetwork settings.Printing from a computer requires the installation of a printer driver. (See Chapter 1,"Before You Start Using This Machine," in the PCL Driver Guide.) In the installationprocedure, select the network printer as the printer destination, and select the printqueue that you created in "NetWare Print Service Settings," on p. 3-3.Setting the Printer Destination1 On the [Start] menu, point to [Settings] ➞ click [Printers] ➞right click the icon of the machine you will use for printing ➞click [Properties].2 Click the [Details] tab or the [Port] tab to display the [Details]sheet or the [Port] sheet ➞ set the printer destination port tothe print queue you created in "NetWare Print ServiceSettings," on p. 3-3.3 Click [OK] to enable the settings.NOTEIf you set up the printer destination when you installed the printer driver, this step isnot necessary.