Canon imageCLASS 2300 Network Manual

Also see for ImageCLASS 2300: Copying guide Specifications Basic guide Printer guide Setup

Contents

Canon imageCLASS 2300 Network Manual Manual pdf 60 page image

NetWare Print Service Settings 3-3Using a NetWare Network (Windows)3NetWare Print Service SettingsTo print using a NetWare network, you need to specify print service settings,including the print server and queue settings. You can use any of the software listedbelow to specify the print service settings from your computer. Specify the settingsusing the easiest method.• NetSpot Device Installer (Canon software included on the Network User SoftwareCD-ROM)• NetSpot Console (via a web browser) (Canon software included on the NetworkUser Software CD-ROM)• NWADMIN or PCONSOLE (Novell software provided with NetWare)IMPORTANT• To specify the print service settings from NetSpot Console or NWADMIN, the computermust have Novell Client (NetWare Client by Novell) installed.• The following procedures explain a sample NetWare setup procedure. Depending onyour environment, the actual setup procedure may differ.Types of Print ServiceBefore specifying print service settings, refer to the following descriptions todetermine the type of print service you are using.NOTE• Normally with NetWare 4.x or later, it is recommended that you use NDS print service.With NetWare 3.x, it is recommended that you use Bindery print service. This manualdescribes procedures for these two combinations only.• With NetWare 5.x, you can use NDPS (Novell Distributed Print Services). If using NDPS,the gateway should be the Novell printer gateway provided with NetWare. This manualdoes not describe NDPS settings. For NDPS settings, see the NetWare manual.■ NDS (Novell Directory Service) and Bindery ModeThis machine supports both NDS and Bindery mode.Determine the appropriate mode according to the network environment you are using. (Ifyou are using NetWare 3.x, only the Bindery mode is available.)