Canon imageCLASS 2300 Network Manual

Also see for ImageCLASS 2300: Copying guide Specifications Basic guide Printer guide Setup

Contents

Canon imageCLASS 2300 Network Manual Manual pdf 41 page image

Setting Up a Computer for Printing2-22Using a TCP/IP Network (Windows/UNIX)2IMPORTANT• If the IP address range settings in the Remote UI do not permit the IP address of acomputer in which a printer driver is installed, you cannot print from the computer. Fordetails, see Chapter 2, "Remote UI Functions," in the Remote UI Guide.• If printing with IPP, the [Pause Printing and Cancel All Documents] settings on the Printermenu in the Windows print queue cannot be used. (To view the print queue, click the[Start] Menu ➞ point to [Settings] ➞ click [Printers] ➞ double-click the icon of themachine.)NOTEConfiguration of Windows 2000/XP or Windows NT as a print server provides efficientmanagement of your network printer. For the detailed procedure, see "Print ServerSettings," on p. 2-35.Printer Connection Method (LPD/Raw)Windows 95/98/Me1 Install the printer driver. (See the PCL Driver Guide.)When the dialog box for selecting the printer destination appears, select [Localprinter]. Do not select [Network printer].The port selection can be changed after installation. You can select any port,such as [LPT1].2 Install the LPR Port Utility from the Network User SoftwareCD-ROM provided with the machine.❑ Insert the Network User Software CD-ROM into the CD-ROM drive.❑ Double-click the [My Computer] icon.❑ Right click the CD-ROM drive icon ➞ click [Open] on the pop-up menu.❑ Double-click the LPRPORT folder.❑ Double-click the [Setup] icon.In some environments this icon appears as [Setup.exe].The Install program starts.❑ Follow the instructions to install the LPR Port Utility.IMPORTANTDepending on your environment, the CD-ROM menu is displayed when you insertthe CD-ROM into the CD-ROM drive. In this case, click [Finish] ➞ perform step 3.