Canon imageCLASS 2300 Network Manual

Also see for ImageCLASS 2300: Copying guide Specifications Basic guide Printer guide Setup

Contents

Canon imageCLASS 2300 Network Manual Manual pdf 21 page image

TCP/IP Network Setup Procedures2-2Using a TCP/IP Network (Windows/UNIX)2TCP/IP Network Setup ProceduresTo use a TCP/IP network, it is necessary to perform the following procedures.IMPORTANT• It is recommended that the network manager perform steps 1, 2, and 3 above.• If you are printing using a TCP/IP network, you can use the following print applications:- LPD- FTP- Raw (Windows 2000/XP only)- IPP (Windows 95/98/Me/2000/XP only)• This machine does not come with printer driver software that can be used for each UNIXplatform.• If configuring the basic protocol settings for the first time, use the control panel of thismachine.1 Network Cable Connection (See Chapter 1, "Before You Start Using ThisMachine," in the PCL Printer Guide.)Connect the network cables in accordance with the PCL Printer Guide.2 Preparation for Protocol Settings (See "Preparation for Protocol Settings," onp. 2-3.)Specify the machine's basic protocol settings for communication between the machine and computers usingthe machine. To specify the settings use:• The machine's Control Panel (Additional Functions menu)• NetSpot Device Installer (Canon utility software)• ARP/PING commands3 Protocol Settings (See "Protocol Settings," on p. 2-13.)Specify the machine's advanced protocol settings. To specify the settings use:• NetSpot Device Installer (Canon utility software)• NetSpot Console (via a web browser) (Canon utility software)• A web browser (Remote UI)• An FTP client4 Computer Settings for Printing (See "Setting Up a Computer for Printing," onp. 2-21.)Specify the settings for each computer you use for printing.