Canon imageCLASS 2300 Network Manual

Also see for ImageCLASS 2300: Copying guide Specifications Basic guide Printer guide Setup

Contents

Canon imageCLASS 2300 Network Manual Manual pdf 63 page image

NetWare Print Service Settings3-6Using a NetWare Network (Windows)3Using PCONSOLE in the Queue Server Mode or Remote Printer Modein the Bindery Mode (NetWare 3.x)1 Log in to NetWare as Supervisor ➞ start PCONSOLE.2 If you have not set up a print server yet, set up the printserver.❑ On the [Available Options] menu, select [Print Server Information] ➞ press[Enter] on the keyboard.❑ Press [Insert] on the keyboard.❑ Enter the name of the print server you are setting up ➞ press [Enter] on thekeyboard.❑ Press [Esc] on the keyboard to return to the [Available Options] menu.NOTE• Be sure to remember the name of the print server. You need it to specify theprinter's protocol settings.• To use the machine in queue server mode in a multiple NetWare serverenvironment, use the same print server name for each NetWare server.3 Set up a Queue, and then assign the print server to the queue.❑ On the [Available Options] menu, select [Print Queue Information] ➞ press[Enter] on the keyboard.❑ Press [Insert] on the keyboard.❑ Enter the name of the queue you are setting up ➞ press [Enter] on thekeyboard.❑ Select the name of the queue you specified ➞ press [Enter] on the keyboard.❑ Select [Queue Servers] ➞ press [Enter] on the keyboard.❑ Press [Insert] on the keyboard.❑ Select the print server you set up in step 2 ➞ press [Enter] on the keyboard.❑ Press [Esc] on the keyboard repeatedly until the [Available Options] menuappears.4 Assign the printer to the print server.❑ On the [Available Option] menu, select [Print Server Information] ➞ press[Enter] on the keyboard.❑ Select the print server you set up in step 2 ➞ press [Enter] on the keyboard.❑ Select [Print Server Configuration] ➞ press [Enter] on the keyboard.❑ Select [Printer Configuration] ➞ press [Enter] on the keyboard.