Canon imageCLASS 2300 Network Manual

Also see for ImageCLASS 2300: Copying guide Specifications Basic guide Printer guide Setup

Contents

Canon imageCLASS 2300 Network Manual Manual pdf 65 page image

Protocol Settings3-8Using a NetWare Network (Windows)3Protocol SettingsYou can specify the protocol settings of the machine by using any of the followingsoftware. Specify the settings using the easiest method.• NetSpot Device Installer (Canon software included on the Network User SoftwareCD-ROM)• NetSpot Console (via a web browser) (Canon software included on the NetworkUser Software CD-ROM)• A web browser (Remote UI)• An FTP clientPrinter Protocol SettingsYou can install NetSpot Console or NetSpot Device Installer from the Network UserSoftware CD-ROM provided with the machine, and use it to specify the protocolsettings on the computer you are using.For instructions on how to install NetSpot Console or NetSpot Device Installer andhow to specify the protocol settings using NetSpot Console or NetSpot DeviceInstaller, see "NetSpot Console," on p. 5-3, or "NetSpot Device Installer," on p. 5-2,respectively.IMPORTANT• The machine's MAC address is necessary. To check the MAC address using the controlpanel, follow the procedure below to perform a test print.1. Press (PRINT) ➞ (OK) on the control panel; the Online indicator goesoff.2. Press (MENU) until appears.3. Press (ITEM) until appears in the second line of thedisplay.4. Press (ENTER).• Check that the machine is connected to the network and that the machine's power isturned ON.NOTE• You can also find online instructions on how to install NetSpot Console in the NetSpotConsole User's Guide or the Readme file, and how to set protocol settings in the NetSpotConsole User's Guide, Online Manual, or Online Help, all of which are included in theNetSpot Console folder on the Network User Software CD-ROM provided with themachine.PRINTF1F2F4