Canon imageCLASS 2300 Network Manual

Also see for ImageCLASS 2300: Copying guide Specifications Basic guide Printer guide Setup

Contents

Canon imageCLASS 2300 Network Manual Manual pdf 33 page image

Protocol Settings2-14Using a TCP/IP Network (Windows/UNIX)2• The online instructions on how to install and set protocol settings using NetSpot DeviceInstaller are found in the Readme file and Online Help, respectively, included in theNetSpot Device Installer folder on the Network User Software CD-ROM.Settings Using a Web Browser (Remote UI)1 Start the web browser ➞ enter the URL below in [Location] or[Address] ➞ press [Enter] on the keyboard.http:///Input Example : http://192.168.203.42/IMPORTANT• For your web browser, use Netscape Navigator/Communicator 4.04 or later, orInternet Explorer 4.01 SP1 or later.• You cannot set this machine's protocol settings through Netscape Communicator4.08 with Turbolinux 4.0. You have to use a different version web browser.• If you are using a connection via a proxy server, use the following settings. (Thesettings differ depending on the network environment.)- When configuring your web browser to use the proxy server, add the IP addressof the machine to Exception (the address not using the proxy server).• Set up the web browser to accept cookies.• If more than one Remote UI is running at the same time, only the last settingspecified will be valid. It is recommended that only one Remote UI is running.