Chapter 1515-115.1 Outline15.1.1 Outline of Service Mode 0017-8503iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018iThe items that follow may be checked/set using the machine's service mode, which is designed the way the service mode used in fax machines is designed in termsof contents and operation.The displayed menus are different by the model.#SSSWUse it to register/set basic fax functions (e.g., error control, echo remedy, communication error correction).Use it to make settings related counter functions.#MENUUse it to register/set items related to functions needed at time of installation (e.g., NL equalizer, transmission level).#NUMERIC PARAMETERThese setting items are for inputting numeric parameters such as the various conditions for the RTN signal transmission.#SPECIALThese setting items are for telephone network control functions. (Do not change the settings.)#NCUThese setting items are for telephone network control functions such as the selection signal transmission conditions and the detection conditions, for thecontrol signals sent from the exchange. (Do not change the settings.)#FAXDo not use.#SCANThese setting items are for image adjustment in scanning.#PRINTThese setting items are for image adjustment in printer assembly and for special mode for the field-related measures.#NETWORKUse it to confirm the contents of the installed CA certificates.#CODECDo not use.#SYSTEMThese are used for the import/export of user information through USB.#ACCRegister the accessories.#COUNTERUse it to check estimates for maintenance/parts replacement.#LMSUse it to set the inactivity of the transmitted license and the license inactivity without transmitting.#E-RDSThis is a setting items related to e-RDS (Embedded RDS).#REPORTUse it to generate reports on various service data.#DOWNLOADUse it to download firmware to the ROM of a PCB in question.#CLEARUse it to reset various data to initial settings.#ERROR DISPLAYThe error and detailed code which have happened now are displayed.#ROM
