Contents - service manual
- symbols used
- Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- system construction
- pickup/delivery/original handling accessories system configuration (ir2018i)
- pickup/ delivery /original handling accessories system configuration (ir2022/ir2022n/ir2025/ir)
- pickup/delivery/original handling accessories system configuration (ir2022i/ir2022k/ir2025i/ir2030i)
- printing/transmitting accessories system configuration (ir2018/ir2022/ir2022n)
- printing/transmitting accessories system configuration (ir2018i/ir2022i/ir2022k/ir2025/ir2025i/ir2030/ir2030i)
- functions of the printing/transmission functions (ir2018/ir2022/ir2022n)
- external view (ir2020/ir2020n/ir2030/ir)
- external view (ir)
- using the machine
- user mode items
- adjustment/cleaning (ir2030i/ir2030/ir2025i/ir2025/ir2022i/ir2018i)
- communication settings (ir2030i/ir2030/ir2025i/ir2025/ir2022i/ir2018i)
- address book settings (ir2030i/ir2030/ir2025i/ir2025/ir2022i/ir2018i)
- cleaning (lcd type)
- cleaning (touch panel type)
- safety of the laser light
- handling the laser unit
- safety of toner
- product specifications
- function list
- printing speed (ir2025/ir2025i)
- printing speed (ir2022/ir2022i/ir2022k/ir2022n)
- printing speed (ir2018/ir2018i/ir2018n)
- types of paper
- Contents
- making pre-checks
- unpacking and installation
- installing the toner bottle
- setting the cassettes
- attaching the ferrite core
- setting the date and time
- attaching other parts
- checking the connection to the network
- checking the network connection
- flow of accessory installation
- installing the card reader
- installation procedure
- installing the heater pcb
- removing reader components
- installing the cassette heater
- installing the control card cable
- Contents
- construction and mechanisms
- image processing
- construction of the image processing module
- flow of image data
- removing the sdram
- Contents
- Specifications, Control Methods, and Functions (iR2030i/iR2030/iR2025i/iR2025/iR2022i/iR2022) ...................... 4
- specifications, control methods, and functions (ir2030i/ir2030/ir2025i/ir2025/ir2022i/ir)
- major components (ir2030i/ir2030/ir2025i/ir2025/ir2022i/ir)
- major components (ir2018i/ir)
- control system configuration (ir2018i/ir)
- reader controller pcb (ir2030i/ir2030/ir2025i/ir2025/ir2022i/ir)
- basic sequence after depression of start key (book mode, one sheet of original)
- controlling the scanner drive system
- reader motor control
- analog control performed by the cis (ir2022i/ir2022/ir2018i/ir)
- analog control performed by the cis (ir2030i/ir2030/ir2025i/ir2025/ir2022i/ir)
- outline of original size detection
- dirt sensor control
- cmos sensor drive
- shading adjustment
- scanner motor
- original size sensor
- Contents
- specifications and control mechanism
- control system configuration
- controlling the laser scanner motor
- controlling the laser shutter
- Major Components of Image Formation System .....................................................................................................6
- specifications of image formation system
- image formation process
- drum unit
- developing unit
- toner container
- controlling the transfer bias
- photosensitive drum cleaning
- removing the drum unit
- transfer charging roller
- Specifications/Configuration/Operation Methods .................................................................................................... 7
- specifications/configuration/operation methods
- locations of main units
- paper path drawing(inner 2way tray-e)
- detecting jams
- stationary jams
- cassette pickup operation
- cassette paper size detection
- manual feed pickup unit
- manual feed pickup solenoid
- separation roller
- Specifications, Control Mechanisms and Functions ................................................................................................8
- specifications, control mechanisms and functions
- various control mechanisms
- target temperatures by mode (ir2030/ir2030i)
- target temperatures by mode (ir2022/ir2022i/ir2022k/ir2022n)
- dc controller pcb
- pressure roller
- fixing delivery sensor
- Contents
- Overview (iR2022/iR2022N/iR2018/iR2018N) ........................................................................................................ 9
- fan control
- power supply system
- rated output of the power supply pcb
- reader front cover
- power supply unit
- hvt pcb
- fan filter
- removing the fan filter (with duplex unit type)
- removing the left door (with duplex unit type)
- Contents
- Table Of Contents
- application operation mode
- soap communication function
- retransmission at the time of soap transmission error
- report output of communication error log
- alarm filtering, alert filtering
- error message list
- periodically replaced parts
- scheduled servicing basic procedure
- scanning system
- making lnitial checks
- outline of electrical components
- list of motors
- list of fans
- list of sensors
- list of switches
- lamps, heaters, and others
- list of pcbs
- Contents
- Table Of Contents
- error code table
- error code details
- jam code
- jam codes (related to inner 2-way tray)
- finisher error codes
- fax error codes
- Table Of Contents
- outline of service mode
- default settings
- setting of bit switch (sssw)
- list of functions
- setting of cassette (cst)
- network parameter settings (network)
- license management (lms)
- inactivity of the transmitted license
- display of counter information (counter)
- clearing counters
- system dump list
- counter list
- spec list
- service label
- download (download)
- error display (error display)
- test mode menu list (touch panel type)
- d-ram test<(1) d-ram test
- scan test ((2) scan test)
- function test ((6) function test)
- roller cleaning mode ((0) roller clean)
- overview of upgrade (lcd type)
- making preparations
- registering the system software (touch panel type)
- downloading system software
- downloading procedure (touch panel type)
- downloading the ca certificate
- service tools
|
Chapter 1313-113.1 Making lnitial Checks13.1.1 Site Environment 0017-5987iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018ia. There must be a source of power whose voltage is as specified (+/-10%). The power plug must never be disconnected day and night.b. The machine must not be in an area subject to high humidity (near a water faucet, water boiler, humidifier). The site must not be too cold or subject to dust.The machine must not be near a source of fire.c. The site must not be subject to ammonium gas.d. The machine must not be exposed to the rays of the sun. As necessary, curtains must be provided.e. The area must be well ventilated. The machine must be on a level floor.f. Be sure that there is a source of power that can be used by the machine.13.1.2 Checking the Paper 0017-5988iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018ia. Be sure the paper being used is of a type recommended by Canon.b. Be sure that the paper is not moist. Try using paper fresh out of package.13.1.3 Checking the Placement of Paper 0017-5989iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018ia. There must be paper in the cassette or the tray deposited within a specific limit.b. If transparencies are used, be sure that they are placed in the manual feed tray in the correct orientation.13.1.4 Checking the Durables 0017-5991iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018iRefer to the table of durables, and replace those that have reached the end of their lives.13.1.5 Checking the Units and Functional Systems 0017-5992iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018i- Check whether the optical system (contact sensor/white panel/copyboard glass) is free from scratches, stain, foreign objects.- Check whether the contact sensor unit moves smoothly. Check whether the rails are free from dirt.- Check whether the contact sensor is not flickering.- Check whether the optical system is free from dew condensation.- Check whether the drum unit and toner bottle are installed securely.- Check whether the photoconductor drum is free from scratches and stain.- Check whether the transfer roller is free from scratches, stain, and deformation.- Check whether the fixing film and pressure roller are free from wear, scratches, dirt, and deformation.- Check whether the fixing thermistor is broken.- Check whether the thermo switch is conductive.- Check whether the paper transport path is free from foreign objects such as paper chips.- Check whether the paper pickup, feed, and separation rollers are free from paper dust. Also check whether these rollers are free from wear, scratches, dirt, anddeformation.- Check whether the registration roller and paper path are free from wear, scratches, dirt, and deformation.- Check whether the transport guide is free from wear, scratches, dirt, and deformation.- Check whether the leading edge of paper is not folded, curled, wavy, or damp.- Check whether use of the Canon-recommended paper/transparency solves the problem.- Check whether the drive system load is heavy.- Check whether gears are worn or cracked?- Check whether the cassette is installed properly. Check whether the paper size is set properly. Check whether the same symptom occurs when the cassette isreplaced with the cassette verified to be normal.- Check whether the middle plate of the cassette moves smoothly. Check whether it is deformed.- Check whether the side and rear alignment plates are adjusted properly.- Check whether the cassette heater switch is turned on (when a cassette heater is installed).- Check whether various adjustment values are the same as those printed on the service label.- Check whether the output between CIS channels has been corrected.(Service mode>TEST MODE>"2"(SCANTEST)>"1")- Check whether the read position has been adjusted properly. (Stream reading: Only when the ADF is installed)(Service mode>TEST MODE>"2"(SCANTEST)>"3"(SHEET POS ADJ))- Check whether the error has been cleared.(Service mode>CLEAR>ERR)- Check whether the power cord is plugged in the outlet securely.- Check whether the specified AC voltage is applied to the outlet.- Check whether sensors, clutches, motors, and solenoids are operating normally. Check whether connectors are connected properly.(Check the power supply and signal routes with reference to the general circuit diagram.)- Check whether all cables are routed properly and all screws are not loose.- Check whether all outer covers are attached.- Check whether the main power switch and the power switch on the operation pane are turned on.
|
