Chapter 77-7T-7-47.2.2 Stationary Jams7.2.2.1 Stationary Jam in Pickup Assembly 0017-4383iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018iStationary Jam in Pickup AssemblyThe registration sensor does not detect absence of paper within the prescribed time before the next leading edge of fed paper reaches the registration sensor.T-7-57.2.2.2 Stationary Jam in Delivery Assembly (Paper Trailing Edge Stationary Jam at First Delivery Sensor/Stationary Jamat First Delivery Sensor) 0017-4384iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018iPaper Trailing Edge Stationary Jam at First Delivery SensorThe first delivery sensor cannot detect absence of paper within the prescribed time after the registration sensor has been turned off.T-7-6Stationary Jam at First Delivery SensorThe first delivery sensor cannot detect absence of paper within the prescribed time after it has detected the leading edge of paper.T-7-77.2.3 Other Jams7.2.3.1 Door Open Jam 0017-4385iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018iDoor Open JamThe door is opened when paper to be printed is in the paper feed path.7.3 Cassette Pick-Up Unit7.3.1 Overview 0017-4386iR2022i / iR2025 / iR2030 / iR2018 / iR2022 / iR2018iThe paper picked up from the cassette is fed to the registration roller using the vertical path roller driven by the main motor (M204). The registration roller is notrotating when paper reaches there, so an arch is formed at the leading of the paper to prevent skewing. The DC controller PCB turns on the registration clutch(CL203) at the prescribed timing to transfer the main motor rotation to the registration roller, thus feeding the paper to the delivery tray through the transfer, sepa-ration, fixing, and delivery assemblies.Sensor/Registration clutchFixing delivery sensor (SR202)Registration clutch (CL203)SensorRegistration sensor(SR209)SensorRegistration sensor (SR209)First delivery sensor (SR203)SensorFirst delivery sensor (SR203)
