Entering the Department ID and Password2-282Basic Operations3 When your operations are complete, press (Log In/Out) on thecontrol panel.If you are using a control card, remove the control card, and take it with you. (See “CardReader-E1,” on p. 3-19.)The screen for entering the Department ID and password appears.NOTE• To perform operations again, you have to re-enter your Department ID and password.• If you do not press (Log In/Out) after you are finished operating the machine, any subsequentcopies and scans for Send/Fax functions made are added to the total of the Department ID youpreviously entered.• Even if you forget to press (Log In/Out) after you are finished operating the machine, thescreen for entering the Department ID and password automatically appears after the set AutoClear Time elapses. (See “Auto Clear Time,” on p. 4-67.)• After pressing (Log In/Out), all settings are canceled, and the machine returns to the screenfor entering the Department ID and password.