Routine Cleaning 7-357Routine MaintenanceRoutine CleaningIf the original is not copied clearly, clean the following parts of the machine. For high-qualityprintouts, we recommend cleaning these parts once or twice a month.• Platen glass• Underside of the feeder/platen cover• Feeder scanning area rollers• White plate, rollerWARNING• Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so mayresult in damage to the plastic parts.• Disconnect the power cord from the power outlet regularly, and clean the area around thebase of the power plug’s metal pins and the power outlet with a dry cloth to ensure that alldust and grime is removed. If the power cord is connected for a long period of time in a damp,dusty, or smoky location, dust can build up around the power plug and become damp. Thismay cause a short circuit and result in a fire.CAUTIONDo not dampen the cloth too much, as this may damage the original or break the machine.IMPORTANT• Sending or receiving documents cannot be done when the main power switch is OFF or the power cordis disconnected.• If the main power switch is turned OFF, all jobs waiting in the print queue will be erased.• Documents received into memory and documents stored for delayed send will be retained forapproximately 60 minutes after the power cord has been disconnected.
