Finisher-U2 3-133Optional EquipmentFinishing ModesThe Finisher-U2 is equipped with the following finishing modes.NOTEIf the Collate or Group mode is set, the output trays move downward as the stack of paper that is outputincreases in quantity and thickness. Once the output trays have reached their stacking limit, printingstops temporarily. Remove all of the prints from the output trays, and printing resumes.■ Collate ModeThe prints are automatically collated into sets arranged in page order. The sets of collated prints can beshifted by pressing [Offset].■ Group ModeAll prints of the same original page are grouped together. The sets of grouped prints can be shifted bypressing [Offset].■ Offset ModeThe print output is shifted alternately to the front and back of the tray, in a vertical (portrait) orientation, ora horizontal (landscape) orientation depending on the orientation of your originals. For example, if youplace A4R originals, the paper is output and shifted in the horizontal direction. If you place A4 originals,the paper is output and shifted in the vertical direction.
