Relationship between Original Orientation and Preprinted Paper Output Chart 9-99 AppendixRelationship between Original Orientation andPreprinted Paper Output ChartPlease use this chart when printing on preprinted paper (i.e., paper with logos).IMPORTANTDo not load the following types of paper into the paper drawers, as this may cause paper jams:- Paper on which color images have been copied (do not copy on the reverse side either).NOTEIf you want to copy on the back side of preprinted paper, place the side you want tocopy on:- face up when using a paper drawer- face down when using the stack bypass■ If You Want to Set Stapling:NOTEWhen the Auto Orientation setting is turned to ‘On’, the staple positions may be different from shownabove. To staple on the top left position of the output, match the orientation of the originals and paper tobe loaded in the machine.Corner: Top Left Corner: Top Left Corner: Top LeftA4 A4R A3ConfidentialEither On or Off Either On or OffConfidentialConfidentialConfidentialConfidential ConfidentialConfidentialConfidentialConfidentialEither On or Off (Set to ‘On’when paper orientation in thestack bypass/paper draweris vertical.)Orientation in stackbypassOrientation onthe platen glassOrientation inthe feederAuto Orientation SettingOriginal/PaperOrientation,SettingsOutputExamplePreprinted PaperOriginalStaplePositionPreprinted side:Face upPreprinted side:Face downOrientation inpaper drawerOriginal side:Face downOriginal side:Face upConfidentialConfidential
