List of Error Messages8-488 TroubleshootingList of Error Codes without MessagesIf a job or operation does not complete successfully, check the error code, and perform thenecessary operations according to the error code displayed. You can check the error code onthe Details screen when you press [Log] on the System Monitor screen. (See “Copy/Print JobDetails,” on p. 5-9.)If a send, receive, or fax job does not complete successfully, the error code is printed in theResults column on the Activity Report and TX Report. (See Chapter 11, “PrintingCommunication Reports,” in the Sending and Facsimile Guide.)Perform the necessary procedures according to the error code.NOTEIf a send job is canceled, “STOP” is printed in the Results column on the TX Report.# 001Cause Paper or originals are jammed.Remedy Remove any jammed paper or originals. (See “Clearing Paper Jams,” on p. 8-3, and “Feeder(DADF-P2),” on p. 8-16.)# 009Cause 1 There is no paper.Remedy Load paper. (See “Paper Drawers,” on p. 7-2.)Cause 2 The paper drawer is not inserted correctly.Remedy Insert the paper drawer properly. (See “Paper Drawers,” on p. 7-2.)# 037Cause Documents could not be received because there was insufficient memory available.Remedy Erase unnecessary documents and documents with errors from memory to increase theamount of available memory. (See Chapter 7, “Checking/Changing the Send/ReceiveStatus,” in the Sending and Facsimile Guide.)
