System Configuration3-63Optional EquipmentAvailable Combination of OptionsThe table shown below describes the optional equipment required for the use for each functionand the limitations in installing the optional equipment.Machine Function Optional EquipmentNeededSimultaneous InstallationRequired LimitationsCopy Function Platen Cover Type-J orFeeder (DADF-P2)* 1 -The Platen Cover Type-J andfeeder (DADF-P2) cannot beinstalled together. If only thePlaten Cover Type-J is attached,some functions may beunavailable.Send Function* 2Platen Cover Type-J orFeeder (DADF-P2)* 1 -The Platen Cover Type-J andfeeder (DADF-P2) cannot beinstalled together. If only thePlaten Cover Type-J is attached,some functions may beunavailable.To enable the Send function, theColor Send Kit must be activated.Color Send Kit -Fax FunctionPlaten Cover Type-J orFeeder (DADF-P2)* 1 -The Platen Cover Type-J andfeeder (DADF-P2) cannot beinstalled together. If only thePlaten Cover Type-J is attached,some functions may beunavailable.Super G3 FAX Board - -PCL Printer Function*3 PCL Printer Kit - -Bar Code PrintingFunction Barcode Printing Kit PCL Printer Kit -CollateGroupOffsetStapleFinisher-U2 - The Inner 2 Way Tray-E2 cannotbe used with the Finisher-U2.Additional Copy TrayInner 2 Way Tray-E2The Finisher-U2 and theAdditional Finisher Tray-C1cannot be used with the Inner 2Way Tray-E2.Additional FinisherTray-C1 Finisher-U2 -