Automatic Gain Control (AGC) Limit62Automatic Gain Control (AGC) LimitWhen recording in dark surroundings, the camcorder will automatically increase the gain to try to get a brighterpicture. By setting a maximum gain value, you can limit the amount of noise in the picture and keep a darkerlook. This function can only be used when the shooting mode is set to ’, ‚ or “.1 Open the AGC limit adjustment screen.[FUNC] > [ AGC Limit] > [n]• An adjustment dial will appear on the screen.• Select [n] again to return the camcorder to automatic gain control.2 Drag your finger along the dial to set the desired maximum gain value.• You can select an AGC limit from 0.0 dB to 38.0 dB.• If [FUNC] > [Looks] is set to [ Wide DR], the lowest AGC limit that can be set will be 9.0 dB.3 Select [X].• When an AGC limit is set, and the maximum gain value will appear on the left of the screen.NOTESNOTES• The AGC limit cannot be set in the following cases:- When the exposure is locked (A 67).- When infrared recording is activated.• If you set the CUSTOM dial’s function to [ AGC Limit] (A 93), you can turn the AGC limit on/off with theCUSTOM button and adjust the AGC limit using the CUSTOM dial.Operating modes:
