6 105External ConnectionsVideo Output ConfigurationThe video signal output from the SDI OUT terminal (u only) and HDMI™ OUT terminal depends on theclip's video configuration and on various menu settings. The video signal output from the HDMI OUT terminalcan also change depending on the capabilities of the connected monitor.u The camcorder cannot output signals to the SDI OUT terminal and HDMI OUT terminal simultaneously.Video Output Configuration (Recording)1 > [£ Display Setup] > [SDI/HDMI Scan Mode] (u) or [HDMI Scan Mode] (v).2 HDMI output: > [£ Display Setup] > [HDMI Max Resolution],u SDI output: > [£ Display Setup] > [SDI Output].3 HDMI output only. The output signal will change automatically depending on the capabilities of the external monitor.4 XF-AVC clips only.5 MP4 clips only.Operating modes:Recordingvideo configuration Scan mode 1Maximumoutputresolution 2Video output configurationResolution Frame rate Resolution Frame rate Color sampling3840x2160 29.97P23.98PP1920x1080 1920x1080 Same as the recordingYCbCr 4:2:28 bit1280x720(59.94P) 1280x720 59.94PPsF — 1920x1080HDMI output: 59.94iu SDI output:29.97PsF/59.94i1920x108059.94P P1920x1080 1920x1080720x480359.94PYCbCr 4:2:210 bit1280x720(59.94P) 1280x720PsF — 1920x1080 59.94i29.97P23.98PP1920x1080 1920x1080 Same as the recording1280x720(59.94P) 1280x720 59.94PPsF — 1920x1080HDMI output: 59.94iu SDI output:29.97PsF/59.94i59.94i4 —1920x1080 1920x1080 59.94i1280x720(59.94P) 1280x720 59.94P1280x720 5 59.94P — — 1280x720 59.94P
