55ZoomingZoomingTo zoom in and out, you can use the focus/zoom ring, the zoom rockers on the camcorder and handle unit, thesupplied wireless controller or an optional RC-V100 Remote Controller, or the onscreen zoom controls.In addition to the 15x optical zoom, you can use the > [v Camera Setup] > [Digital Zoom] setting* toactivate the digital zoom (300x) or the digital tele-converter, which allows you to enlarge the image on the screendigitally.* This setting is not available in mode or when > [v Camera Setup] > [Conversion Lens] is set to[¿ WA-U58].Using the Focus/Zoom Ring1 Set the focus/zoom ring switch to ZOOM.2 Turn the focus/zoom ring to adjust the zoom.• Turn the focus/zoom ring slowly for a slow zoom; turn it fasterfor faster zooms.• The zoom bar that appears on the screen indicates theapproximate zoom position.NOTESNOTES• You can customize the operation of the focus/zoom ring with the> [v Camera Setup] > [Focus/Zoom Ring Operation]and [Zoom Ring Direction] settings.• If you turn the focus/zoom ring too quickly, the camcorder maynot be able to zoom immediately. In such case, the camcorder willzoom after you finish turning the ring.Using the Grip Zoom RockerMove the grip zoom rocker toward T (wide angle) to zoomout. Move it toward S (telephoto) to zoom in.• You can set the zoom speed with the following procedure.Operating modes:Focus/zoom ringW Zoom out T Zoom in
